ISSN 2354-1814
 

- 


NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS

Oviawe, C.I., Omorodion, I.I..

Abstract
A Numerical investigation of abrasive wear rate of die in extrusion process was computed using Raleigh-Ritz finite element method. The weak form of the governing differential equation was obtained and stiffness matrix, mass matrix and flux vector were generated for each element to get the pressure of nodal points. The stiffness matrix and mass matrix were assembled by enforcing continuity for the nodal degree of freedom to obtain the global systems equations. The lagrange quadratic interpolation functions for different elements were calculated for Neumann boundary conditions. Time approximation was done with the aid of the Crank-Nicholson finite difference scheme and time step was used to obtain equation for the solution. Using a numerical example, the results showed a maximum error of 0.2 percent for a number of quadratic elements. It is concluded that as the mesh was refined further progressively, the finite element solution approaches the exact solution admirably. The results are displayed in tabular form.

Key words: Raleigh-Ritz, Finite Element, Extrusion process, Time approximation, Crank-Nicholson


 
ARTICLE TOOLS
Abstract
PDF Fulltext
Print this article Print this Article
How to cite this articleHow to cite this article
Citation Tools
Related Records
 Articles by Oviawe
Articles by C.I.
Articles by Omorodion
Articles by I.I.
on Google
on Google Scholar
Article Statistics
 Viewed: 772
Downloaded: 21
Cited: 0

How to Cite this Article
Pubmed Style

Oviawe, C.I., Omorodion, I.I.. NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS. Equijost. 2018; 5(1): 139-152.


Web Style

Oviawe, C.I., Omorodion, I.I.. NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS. http://www.equijost.com/?mno=302643930 [Access: August 21, 2019].


AMA (American Medical Association) Style

Oviawe, C.I., Omorodion, I.I.. NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS. Equijost. 2018; 5(1): 139-152.



Vancouver/ICMJE Style

Oviawe, C.I., Omorodion, I.I.. NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS. Equijost. (2018), [cited August 21, 2019]; 5(1): 139-152.



Harvard Style

Oviawe, C.I., Omorodion, I.I. (2018) NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS. Equijost, 5 (1), 139-152.



Turabian Style

Oviawe, C.I., Omorodion, I.I.. 2018. NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS. Equity Journal of Science and Technology, 5 (1), 139-152.



Chicago Style

Oviawe, C.I., Omorodion, I.I.. "NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS." Equity Journal of Science and Technology 5 (2018), 139-152.



MLA (The Modern Language Association) Style

Oviawe, C.I., Omorodion, I.I.. "NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS." Equity Journal of Science and Technology 5.1 (2018), 139-152. Print.



APA (American Psychological Association) Style

Oviawe, C.I., Omorodion, I.I. (2018) NUMERICAL INVESTIGATION OF ABRASIVE WEAR RATE OF DIE IN EXTRUSION PROCESS. Equity Journal of Science and Technology, 5 (1), 139-152.





Most Viewed Articles
  • EFFECT OF LATE PLANTING ON INCIDENCE AND SEVERITY OF STENOCARPELLA EAR ROT OF MAIZE IN LAFIA, NASARAWA STATE, NIGERIA
    Garba Y. and Ogara I. M.
    Equijost. 2016; 4(1): 57-60
    » Abstract

  • PREDICTION OF CUSTOMER ACCESSIBILITY OF ELECTRONIC BANKING LOGISTIC REGRESSION IN NIGERIA
    Suleiman, S. and Usman, U.
    Equijost. 2016; 4(1): 93-97
    » Abstract

  • ALTERNATIVE RATIO TYPE ESTIMATOR IN SAMPLE SURVEY
    Adewara, A. A.
    Equijost. 2016; 4(1): 79-85
    » Abstract

  • Abelmoschus esculentus L.Moench V.N:S:N FRUITS: ANTIOXODANT POTENTIAL, PHYTOCHEMICALS AND MINERAL COMPOSITION
    Sani, I.
    Equijost. 2016; 4(1): 5-9
    » Abstract

  • EFFECTS OF DIFFERENT HORMONES ON THE GROWTH PERFORMANCE OF Clarias gariepinus
    ADESHINA, I., ADEWALE, Y. A. and DALHATU, B. J.
    Equijost. 2016; 4(1): 10-13
    » Abstract

  • PATTERN AND DETERMINANTS OF CONSUMERS DEMAND FOR CANNED FOOD IN ILORIN METROPOLIS OF KWARA STATE, NIGERIA
    Babatunde, R.O.; Amolegbe, K.B.; Akingbohungbe, I.T.
    Equijost. 2018; 5(1): 23-34
    » Abstract

  • FRESH FISH POISONING: A CASE STUDY OF FISHES HARVESTED FROM RIVER JEGA
    Shabanda, I. S., Atiku, F. A. and Obaroh, I. O.
    Equijost. 2013; 1(1): 57-59
    » Abstract

  • RELATIONSHIP BETWEEN BODY WEIGHT AND ZOOMETRIC MEASUREMENTS IN SOME PURE AND CROSSBRED TURKEY POULTS
    Amao, O. J., Ayorinde, K. L. and Fayeye, T. R.
    Equijost. 2016; 4(1): 24-30
    » Abstract

  • ECONOMIC VIABILITTY OF CHILLI PEPPER AND NEEM SEED KERNEL POWDER IN THE MANAGEMENT OF LEPIDOPTEROUS STEMBORERS ON SORGHUM
    Okrikata E., Mai Bukar, S., Ali, B. and Umaru, I. J.
    Equijost. 2016; 4(1): 61-67
    » Abstract

  • EVALUATION OF EFFECTIVENESS OF CHLORAPHENICOL TO SOME CLINICAL ISOLATES
    Danjumma, B. J., Bello, R. and Usman, M. S.
    Equijost. 2016; 4(1): 31-33
    » Abstract

  • Most Downloaded
  • PHYSICOCHEMICAL PROPERTIES OF THE SEED OIL OF ANNONA MURICATA GROWN IN ILORIN, KWARA STATE
    Nwaehujor, I. U., Olatunji, G.A., Afolayan, S. S., Abel, G. I., Oladipo, A. K., and Abdullahi, S.
    Equijost. 2016; 4(1): 1-4
    » Abstract

  • PREDICTION OF CUSTOMER ACCESSIBILITY OF ELECTRONIC BANKING LOGISTIC REGRESSION IN NIGERIA
    Suleiman, S. and Usman, U.
    Equijost. 2016; 4(1): 93-97
    » Abstract

  • DESIGN AND FABRICATION OF A HAMMER MILL FROM LOCALLY SOURCED MATERIALS
    Oviawe, C. I., Osite, L. M. and Okundaye, S. O
    Equijost. 2016; 4(1): 105-110
    » Abstract

  • EFFECT OF SEX, WATTLE, BEARD, HAIR TYPE AND EXTRA TEAT ON GROWTHRELATED TRAITS OF EXTENSIVELY MANAGED GOAT (Capra aegagrus) POPULATION OF NIGER STATE, NIGERIA
    Kolo, P. S., Egena, S. S. A., Tsado, D. N. and Adisa-Shehu, M.
    Equijost. 2016; 4(1): 14-23
    » Abstract

  • RELATIONSHIP BETWEEN BODY WEIGHT AND ZOOMETRIC MEASUREMENTS IN SOME PURE AND CROSSBRED TURKEY POULTS
    Amao, O. J., Ayorinde, K. L. and Fayeye, T. R.
    Equijost. 2016; 4(1): 24-30
    » Abstract

  • Effect of Seed Rate, Sowing Method and Poultry Manure on the Performance of Finger Millet Eleusine coracana L. V.N:S:N: Gaertn. in Samaru northern Guinea Savanna, Nigeria
    Gani, M., Mahadi, M. A. Dadari, S. A. Babaji, B. A. and Shinggu, C. P.
    Equijost. 2016; 4(1): 51-56
    » Abstract

  • EVALUATING ARIMA MODELS FORECAST ON THE CURRENT ACCOUNT DEFICIT IN NIGERIA USING SYMMETRIC LOSS FUNCTIONS
    Lawal, H., Ahmed, A., Tasi'u, M.
    Equijost. 2016; 4(1): 86-92
    » Abstract

  • IMPROVED CLASS OF RATIO-PRODUCT TYPE ESTIMATORS BY USING UNKNOWN WEIGHT
    Singh, R. V. K., Ahmed, A., Onwuka, G. I., Babayemi, A. W. and Kumar, D.
    Equijost. 2016; 4(1): 98-104
    » Abstract

  • EFFECT OF ADDITIVE CONCENTRATION ON CEMENT BONDED PARTICLE BOARD PRODUCTION IN SOKOTO NORTH-WEST NIGERIA
    Malami, A. A. and Yakubu, E. E.
    Equijost. 2016; 4(1): 74-78
    » Abstract

  • STUDIES ON MORPHOLOGICAL AND YIELD PARAMETERS OF TWO VARIETIES OFOKRA Abelmoschus esculentus L. Moench V.N:S:N IN SOKOTO, NIGERIA
    Sukuni, M. and Aliyu, U.
    Equijost. 2016; 4(1): 40-43
    » Abstract

  • Most Cited Articles